Product Description

100% Original Launch CNC-602A Injector Cleaner & Tester

 CNC-602A is an advanced electronic mechanical prouct,which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Why have to clean injector?
When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls.
Gasoline is easy to volatile, but wax and varnish were stayed.
Heat these wax and varnish day after day,they will be changed into hard coke.
The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel.
The hard coke lead 4 problems on injector
1. Leak
2. Blockage
3. Poor atomization
4. Uneven fuel injection
So we have to clean injector and engine system
Tips:
Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint.
A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning to be adequately cleaned. Additional cleanings may be needed to clear heavy deposits.
Pls note:
1.Input voltage is 220V. CNC602A only have 220Volt , if you need use for 110V you need to pay extra 40usd to buy a voltage converter adaptor(from 220V to 110V) .
 US warehouse products contain voltage converter adapter (from 220V to 110V)
2. Launch CNC602A is 6-cylinder fuel injector cleaning machine (with 6 tubes),and it can clean and test six injectors as same time.
a.) If 4-cylinder engine,when use the CNC602A to clean and test 4 injector(there are 2 connector in machine should be stoppered).
b.) Eight-cylinder engine, when you use CNC602 do clean the test, you should do clean the test twice per four injector.
3. Item fit for two kinds of injectors. Top feed injector accessories were standard configure. Side feed injector accessories for option. Please contact us if you want to side feed accessories
4. Support no dismantle clean car fuel system. (Need additional connector kits, not include in the item. Add 80USD to get it)
5. The machine work on petrol injector, not for diesel injector
Support Model:
Audi,Australia Ford,Benz,BMW,Brilliance,Chevrolet,Chevy,Chrysler,Citroen, Dacia,Dadi,Daewoo,Daihatsu,Demo,Fiat,Ford,GM,Holden, Honda,Hyundai,Isuzu,Jaguar,Kia,Lancia,Land Rover,Mahindra,Maruti,Mazda,Mitsubish,Nissan,Opel, Peugeot,Porsche,Renault,Romeo,Rover,Saab,Seat,Skoda, Smart,Subaru,Suzuki,Tata,Toyota,Volvo,VW,Yamaha
Launch CNC602A Features & Functions
1. Ultrasonic Cleaning: Perform simultaneous cleaning on several injectors and remove the carbon deposits
on the injectors completely.
2. Uniformity/ Sprayability Test: Test the uniformity each injector, and monitor the spraying status of each
injector with the help of backlight. This test is also for reverse flush.
3. Leakage Test: Test the sealing and dribbling conditions of injectors under system pressure.
4.Injecting Flow Fest: Check the injecting amount of 15 seconds constant injection.
5. Auto Test: Test injectors by simulating different working conditions.
 6. On-vehicle Cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning
injectors on vehicle.
CNC-602A Spare Parts
No. PartCode PartName
1  105020217  CNC pulse signal connection cable 1,T=0.5
2  105020218  CNC pulse signal connection cable 2,T=0.8
3  103260037  Ultrasonic cleaner assembly 100W
4  106030038  On-vehicle adaptor package(tool kits)
5  107010428  CNC-602A user manual(En&Ch)
6  103250013  Top-supply connector 1
7  103250015  Swiss thread adaptor for fuel top-supply injector
8  103250016  Coarse thread adaptor for fuel top-supply injector
9  103250018  CNC-601/801 Hexangular stopper
10  104990012  CNC-801 BUICK injector adaptor
Specification:
* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm;
* Weight: About 28kg
220V Original Launch CNC602A fuel injector cleaner tester cnc-602a 6jars Injecting flow test Ultrasonic cleaning

There are no reviews yet.

Be the first to review “Launch CNC602A fuel injector cleaner 220V (Order on demand)”